Peržiūrėti šaltinį Dht22

== Golang ==

<syntaxhighlight lang="go">
/*
2020 (c) \dev\null
*/

package main

import (
      . "github.com/cyoung/rpi"
	"github.com/d2r2/go-dht"
        "fmt"
        "log"
        "flag"
        "time"
)

var (
pin int
vcc int
)

func RecoveryPin(pin int) {
log.Printf("Powering off pin %d\n",pin)
PinMode(BoardToPin(pin), OUTPUT)
DigitalWrite(BoardToPin(pin), LOW)
log.Printf("Waiting 10 secondds...\n")
time.Sleep(time.Second*10)
PinMode(pin, OUTPUT)
DigitalWrite(BoardToPin(pin), HIGH)
log.Printf("Powering on pin %d\n",pin)
time.Sleep(time.Second*10)
return
}

func main() {
        flag.IntVar(&pin, "pin", 7, "Specify pin for dht22 sensor") // GPIO porto tipas (Raspberry GPIO7, OrangePI PA21 todėl RaspberryPI rašome 7 o Orange rašome 21)
        flag.IntVar(&vcc, "vcc", 19, "VCC pin for dht22 sensor recovery") // fizinis raspberrypi portas
        check := flag.Bool("recovery", false,"Do a sensor recovery on startup") // ar daryti recovery startavimo metu, atjungiant maitinima
        flag.Parse()
        log.Printf("Initializing wiring-pi interface...\n")
        WiringPiSetup()
	// Read DHT11 sensor data from pin 4, retrying 10 times in case of failure.
	// You may enable "boost GPIO performance" parameter, if your device is old
	// as Raspberry PI 1 (this will require root privileges). You can switch off
	// "boost GPIO performance" parameter for old devices, but it may increase
	// retry attempts. Play with this parameter.
	// Note: "boost GPIO performance" parameter is not work anymore from some
	// specific Go release. Never put true value here.
        if *check {
        RecoveryPin(vcc)
        }

        fmt.Printf("Testing pin: %d\n",pin)
	temperature, humidity, retried, err :=
		dht.ReadDHTxxWithRetry(dht.DHT22, pin, false, 10)
	if err != nil {
		log.Fatal(err)
                RecoveryPin(vcc)
	}
	// Print temperature and humidity
	fmt.Printf("Temperature = %v*C, Humidity = %v%% (retried %d times)\n",
		temperature, humidity, retried)
}
</syntaxhighlight>
Su šia programa taip pat galime pratestuoti visus portus ir rasti sensorių, jeigu atmintinai nežinome GPIO numeravimo:
 for ((i=1;i<=200;i++)); do ./read_dht -pin $i; done


[[Category:Hardware]]
[[Category:RaspberryPI]]
[[Category:OrangePI]]