Keydb: Skirtumas tarp puslapio versijų
Jump to navigation
Jump to search
(nerodoma viena tarpinė versija, sukurta to paties naudotojo) | |||
12 eilutė: | 12 eilutė: | ||
Systemd service faila galima [[keydb.service|rasti cia]], jį dedame į '''/etc/systemd/system/keydb.service''' | Systemd service faila galima [[keydb.service|rasti cia]], jį dedame į '''/etc/systemd/system/keydb.service''' | ||
Sukuriame failą /etc/keydb.conf ir sudedame keydb konfiguraciją kaip aprašyta žemiau: | Sukuriame failą /etc/keydb.conf ir sudedame keydb konfiguraciją kaip aprašyta žemiau: | ||
− | <syntaxhighlight lang=text"> | + | <syntaxhighlight lang="text"> |
− | + | bind 127.0.0.1 | |
+ | protected-mode yes | ||
+ | port 6379 | ||
+ | tcp-backlog 65365 | ||
+ | timeout 0 | ||
+ | tcp-keepalive 0 | ||
+ | daemonize yes | ||
+ | supervised no | ||
+ | pidfile /var/run/redis/keydb-server.pid | ||
+ | loglevel notice | ||
+ | logfile /var/log/redis/keydb.log | ||
+ | databases 16 | ||
+ | always-show-logo yes | ||
+ | save 600 1000000 | ||
+ | stop-writes-on-bgsave-error no | ||
+ | rdbcompression yes | ||
+ | rdbchecksum no | ||
+ | dbfilename dump.rdb | ||
+ | dir /var/lib/redis | ||
+ | replica-serve-stale-data yes | ||
+ | replica-read-only yes | ||
+ | repl-diskless-sync no | ||
+ | repl-diskless-sync-delay 5 | ||
+ | repl-disable-tcp-nodelay no | ||
+ | replica-priority 100 | ||
+ | lazyfree-lazy-eviction no | ||
+ | lazyfree-lazy-expire no | ||
+ | lazyfree-lazy-server-del no | ||
+ | replica-lazy-flush no | ||
+ | appendonly no | ||
+ | appendfilename "appendonly.aof" | ||
+ | appendfsync everysec | ||
+ | no-appendfsync-on-rewrite no | ||
+ | auto-aof-rewrite-percentage 100 | ||
+ | auto-aof-rewrite-min-size 64mb | ||
+ | aof-load-truncated yes | ||
+ | aof-use-rdb-preamble yes | ||
+ | lua-time-limit 5000 | ||
+ | slowlog-log-slower-than 10000 | ||
+ | slowlog-max-len 128 | ||
+ | latency-monitor-threshold 0 | ||
+ | notify-keyspace-events "" | ||
+ | hash-max-ziplist-entries 512 | ||
+ | hash-max-ziplist-value 64 | ||
+ | list-max-ziplist-size -2 | ||
+ | list-compress-depth 0 | ||
+ | set-max-intset-entries 512 | ||
+ | zset-max-ziplist-entries 128 | ||
+ | zset-max-ziplist-value 64 | ||
+ | hll-sparse-max-bytes 3000 | ||
+ | stream-node-max-bytes 4096 | ||
+ | stream-node-max-entries 100 | ||
+ | activerehashing yes | ||
+ | client-output-buffer-limit normal 0 0 0 | ||
+ | client-output-buffer-limit replica 256mb 64mb 60 | ||
+ | client-output-buffer-limit pubsub 32mb 8mb 60 | ||
+ | hz 10 | ||
+ | dynamic-hz yes | ||
+ | aof-rewrite-incremental-fsync yes | ||
+ | rdb-save-incremental-fsync yes | ||
+ | server-threads 4 | ||
</syntaxhighlight> | </syntaxhighlight> | ||
20 eilutė: | 80 eilutė: | ||
systemctl disable redis | systemctl disable redis | ||
Įjungiame keydb | Įjungiame keydb | ||
− | + | systemctl start keydb | |
+ | systemctl enable keydb | ||
== Kernel tune == | == Kernel tune == | ||
28 eilutė: | 89 eilutė: | ||
sysctl -p | sysctl -p | ||
echo never > /sys/kernel/mm/transparent_hugepage/enabled | echo never > /sys/kernel/mm/transparent_hugepage/enabled | ||
+ | Experimental | ||
+ | vm.swappiness=0 # turn off swapping | ||
+ | net.ipv4.tcp_sack=1 # enable selective acknowledgements | ||
+ | net.ipv4.tcp_timestamps=1 # needed for selective acknowledgements | ||
+ | net.ipv4.tcp_window_scaling=1 # scale the network window | ||
+ | net.ipv4.tcp_congestion_control=cubic # better congestion algorythm | ||
+ | net.ipv4.tcp_syncookies=1 # enable syn cookied | ||
+ | net.ipv4.tcp_tw_recycle=1 # recycle sockets quickly | ||
+ | |||
[[Category:Tinklas]] | [[Category:Tinklas]] | ||
+ | [[Category:Serveriai]] | ||
[[Category:Duombazės]] | [[Category:Duombazės]] | ||
{{Template:Distributions}} | {{Template:Distributions}} |
Dabartinė 16:17, 9 sausio 2020 versija
Debian 9 (stretch) install[keisti]
wget https://download.keydb.dev/keydb-stable.tar.gz tar xzvf keydb-stable.tar.gz cd KeyDB/ apt-get install build-essential nasm autotools-dev autoconf libjemalloc-dev tcl tcl-dev uuid-dev libcurl4-openssl-dev make distclean make && make install
Systemd service faila galima rasti cia, jį dedame į /etc/systemd/system/keydb.service Sukuriame failą /etc/keydb.conf ir sudedame keydb konfiguraciją kaip aprašyta žemiau:
bind 127.0.0.1
protected-mode yes
port 6379
tcp-backlog 65365
timeout 0
tcp-keepalive 0
daemonize yes
supervised no
pidfile /var/run/redis/keydb-server.pid
loglevel notice
logfile /var/log/redis/keydb.log
databases 16
always-show-logo yes
save 600 1000000
stop-writes-on-bgsave-error no
rdbcompression yes
rdbchecksum no
dbfilename dump.rdb
dir /var/lib/redis
replica-serve-stale-data yes
replica-read-only yes
repl-diskless-sync no
repl-diskless-sync-delay 5
repl-disable-tcp-nodelay no
replica-priority 100
lazyfree-lazy-eviction no
lazyfree-lazy-expire no
lazyfree-lazy-server-del no
replica-lazy-flush no
appendonly no
appendfilename "appendonly.aof"
appendfsync everysec
no-appendfsync-on-rewrite no
auto-aof-rewrite-percentage 100
auto-aof-rewrite-min-size 64mb
aof-load-truncated yes
aof-use-rdb-preamble yes
lua-time-limit 5000
slowlog-log-slower-than 10000
slowlog-max-len 128
latency-monitor-threshold 0
notify-keyspace-events ""
hash-max-ziplist-entries 512
hash-max-ziplist-value 64
list-max-ziplist-size -2
list-compress-depth 0
set-max-intset-entries 512
zset-max-ziplist-entries 128
zset-max-ziplist-value 64
hll-sparse-max-bytes 3000
stream-node-max-bytes 4096
stream-node-max-entries 100
activerehashing yes
client-output-buffer-limit normal 0 0 0
client-output-buffer-limit replica 256mb 64mb 60
client-output-buffer-limit pubsub 32mb 8mb 60
hz 10
dynamic-hz yes
aof-rewrite-incremental-fsync yes
rdb-save-incremental-fsync yes
server-threads 4
Prieš įgalindami keydb servisą, turime išjungti senajį redis serverį.
systemctl stop redis systemctl disable redis
Įjungiame keydb
systemctl start keydb systemctl enable keydb
Kernel tune[keisti]
echo 'net.core.somaxconn=65365' >> /etc/sysctl.conf echo 'vm.overcommit_memory = 1' >> /etc/sysctl.conf sysctl -p echo never > /sys/kernel/mm/transparent_hugepage/enabled
Experimental
vm.swappiness=0 # turn off swapping net.ipv4.tcp_sack=1 # enable selective acknowledgements net.ipv4.tcp_timestamps=1 # needed for selective acknowledgements net.ipv4.tcp_window_scaling=1 # scale the network window net.ipv4.tcp_congestion_control=cubic # better congestion algorythm net.ipv4.tcp_syncookies=1 # enable syn cookied net.ipv4.tcp_tw_recycle=1 # recycle sockets quickly