Kodi: Skirtumas tarp puslapio versijų
Jump to navigation
Jump to search
| (nerodoma viena tarpinė versija, sukurta to paties naudotojo) | |||
| 13 eilutė: | 13 eilutė: | ||
sudo wget -O /etc/init.d/kodi <nowiki>https://gist.githubusercontent.com/shyamjos/60ea61fd8932fd5c868c80543b34f033/raw</nowiki>;sudo chmod +x /etc/init.d/kodi | sudo wget -O /etc/init.d/kodi <nowiki>https://gist.githubusercontent.com/shyamjos/60ea61fd8932fd5c868c80543b34f033/raw</nowiki>;sudo chmod +x /etc/init.d/kodi | ||
sudo systemctl enable kodi | sudo systemctl enable kodi | ||
| + | |||
| + | == Wiimote pririšimas == | ||
| + | |||
| + | * Start the '''bluetoothctl''' interactive command. There one can input help to get a list of available commands. | ||
| + | * Turn the power to the controller on by entering power on. It is off by default. | ||
| + | * Turn the agent on with '''agent on'''. | ||
| + | * Enter device discovery mode with '''scan on''' command if device is not yet on the list. | ||
| + | * Now press the red sync button behind the battery cover on the back of the wiimote. (This will also unpair it with your wii.) | ||
| + | * Enter '''pair MAC Address''' to do the pairing (tab completion works). | ||
| + | * If using a device without a PIN, one may need to manually trust the device before it can reconnect successfully. Enter '''trust MAC Address''' to do so. | ||
| + | * Finally, use '''connect MAC_address''' to establish a connection. | ||
| + | * Now disconnect with '''disconnect MAC_adress'''. The wiimote should turn off. | ||
| + | * Now press the power button on the wiimote to reconnect. This should work after a reboot of RetroPie. | ||
| + | * Use '''trust MAC_address''' to trust the device and not ask everytime it wants to connect. | ||
| + | * If it didn't work, you may need to '''remove MAC-adress''' and try the whole process again. | ||
| + | * See also: https://wiki.archlinux.org/index.php/XWiimote#Auto-Reconnect_is_not_working_after_pairing_with_red_sync-button | ||
| + | |||
[[Category:Raspbian]] | [[Category:Raspbian]] | ||
[[Category:Hardware]] | [[Category:Hardware]] | ||
[[Category:RaspberryPI]] | [[Category:RaspberryPI]] | ||
Dabartinė 14:56, 17 rugsėjo 2022 versija
sudo apt-get install kodi policykit-1 sudo nano /etc/polkit-1/localauthority/50-local.d/all_users_shutdown_reboot.pkla
[Allow all users to shutdown and reboot] Identity=unix-user:* Action=org.freedesktop.login1.*;org.freedesktop.upower.*;org.freedesktop.consolekit.system.* ResultActive=yes ResultAny=yes ResultInactive=yes
Automatinis startavimas sistemos krovimosi metu
sudo wget -O /etc/init.d/kodi https://gist.githubusercontent.com/shyamjos/60ea61fd8932fd5c868c80543b34f033/raw;sudo chmod +x /etc/init.d/kodi sudo systemctl enable kodi
Wiimote pririšimas[keisti]
- Start the bluetoothctl interactive command. There one can input help to get a list of available commands.
- Turn the power to the controller on by entering power on. It is off by default.
- Turn the agent on with agent on.
- Enter device discovery mode with scan on command if device is not yet on the list.
- Now press the red sync button behind the battery cover on the back of the wiimote. (This will also unpair it with your wii.)
- Enter pair MAC Address to do the pairing (tab completion works).
- If using a device without a PIN, one may need to manually trust the device before it can reconnect successfully. Enter trust MAC Address to do so.
- Finally, use connect MAC_address to establish a connection.
- Now disconnect with disconnect MAC_adress. The wiimote should turn off.
- Now press the power button on the wiimote to reconnect. This should work after a reboot of RetroPie.
- Use trust MAC_address to trust the device and not ask everytime it wants to connect.
- If it didn't work, you may need to remove MAC-adress and try the whole process again.
- See also: https://wiki.archlinux.org/index.php/XWiimote#Auto-Reconnect_is_not_working_after_pairing_with_red_sync-button