Kodi
Jump to navigation
Jump to search
sudo apt-get install kodi policykit-1 sudo nano /etc/polkit-1/localauthority/50-local.d/all_users_shutdown_reboot.pkla
[Allow all users to shutdown and reboot] Identity=unix-user:* Action=org.freedesktop.login1.*;org.freedesktop.upower.*;org.freedesktop.consolekit.system.* ResultActive=yes ResultAny=yes ResultInactive=yes
Automatinis startavimas sistemos krovimosi metu
sudo wget -O /etc/init.d/kodi https://gist.githubusercontent.com/shyamjos/60ea61fd8932fd5c868c80543b34f033/raw;sudo chmod +x /etc/init.d/kodi sudo systemctl enable kodi
Wiimote pririšimas[keisti]
- Start the bluetoothctl interactive command. There one can input help to get a list of available commands.
- Turn the power to the controller on by entering power on. It is off by default.
- Turn the agent on with agent on.
- Enter device discovery mode with scan on command if device is not yet on the list.
- Now press the red sync button behind the battery cover on the back of the wiimote. (This will also unpair it with your wii.)
- Enter pair MAC Address to do the pairing (tab completion works).
- If using a device without a PIN, one may need to manually trust the device before it can reconnect successfully. Enter trust MAC Address to do so.
- Finally, use connect MAC_address to establish a connection.
- Now disconnect with disconnect MAC_adress. The wiimote should turn off.
- Now press the power button on the wiimote to reconnect. This should work after a reboot of RetroPie.
- Use trust MAC_address to trust the device and not ask everytime it wants to connect.
- If it didn't work, you may need to remove MAC-adress and try the whole process again.
- See also: https://wiki.archlinux.org/index.php/XWiimote#Auto-Reconnect_is_not_working_after_pairing_with_red_sync-button